Hydrostatic Steering; Air Cleaner; Cab Filtration - Zetor MAJOR HS Series Operator's Manual

Only release the overpressure plug when the coolant has cooled down! There is a danger of
scalding!

Hydrostatic steering

check the oil level in the gearbox housing
check tightness of screws and nuts of the control rods
and levers
check state of all hoses of hydraulic control circuits
whether they are not damaged and oil is not leaking

Air cleaner

If the air cleaner is heavily clogged with dirt, this condition
is indicated by a sensor that lights up an indicator on the
dashboard.

Cab filtration

Check and if necessary clean the air filters of the air
conditioning of the cabin (1) located in the rear overhang
of the roof and filter of the heating of the cabin (2) located
on the left side of the tractor before the cabin. Perform
partial regeneration by knocking or blowing with
compressed air. Regeneration of filters depends on
dustiness of the working environment. Perform cleaning or
replacement of filter elements after disassembly of the
cover grids.
PREVENTIVE DAILY MAINTENANCE
22
MHS16N045
MHS16N051
MHS16N052