Information Concerning Ec Declaration Of Conformity And Ec Declaration Of Incorporation - SKF MicroDosage System Assembly Instructions Manual

EN
Page 6

Information concerning EC Declaration of Conformity and EC Declaration of Incorporation

The products,
metering unit MDU
lubricant reservoir MDR
of the minimal quantity lubrication system
MDS SKF microdosage system
are hereby confirmed to comply with the es-
sential protection requirements stipulated by
the following Directive(s) of the Council on the
approximation of laws of the Member States:
Machinery Directive 2006 2006/42/EG
Electromagnetic Compatibility 2014/30/EU
Low Voltage Devices 2014/35/EU
RoHS II Directive 2011/65/EU
Notes:
(a) This declaration certifies compliance with
the aforementioned Directives but does not
constitute a guarantee of characteristics.
(b) The safety instructions in the documenta-
tion included with the products must be
observed.
(c) The commissioning of the products here
certified is prohibited until the machine,
tool, or similar in which the product is in-
stalled conforms with the provisions and
requirements of the applicable Directives.
Information concerning EC Declaration of Conformity and EC Declaration of Incorporation
(d) The operation of the products at non-stan-
dard supply voltage, as well as non-adher-
ence to the installation instructions, can
negatively impact the EMC characteristics
and electrical safety.
We further declare:
The aforementioned products are, accord-
ing to EC Machinery Directive 2006/42/
EC, Annex II Part B, designed for installa-
tion in machinery / for incorporation with
other machinery to form a machine. Within
the scope of the EC Directive, commission-
ing shall be prohibited until the machinery
in which these products are installed con-
forms with the provisions of this Directive.
The aforementioned products may, with
reference to EC Directive 97/23/EC con-
cerning pressure equipment, only be used
in accordance with their intended use and
in conformity with the instructions provided
in the documentation. The following must
be observed in this regard:
The products are neither designed nor ap-
proved for use in conjunction with fluids of
Group 1 (Dangerous Fluids) as defined in
Article 2, Para. 2 of Directive 67/548/EEC of
June 27, 1967. The products are neither de-
signed nor approved for use in conjunction
with gases, liquefied gases, pressurized gases
in solution, vapors, or and such fluids whose
vapor pressure exceeds normal atmospheric
pressure (1013 mbar) by more than 0.5 bar
at their maximum permissible temperature.
When used in conformity with their intended
use, the products supplied by SKF Lubrication
Systems Germany GmbH do not reach the
limit values listed in Article 3, Para. 1, Clauses
1.1 to 1.3 and Para. 2 of Directive 97/23/EC.
They are therefore not subject to the require-
ments of Annex 1 of the Directive.
Consequently, they do not bear a CE marking
in respect of Directive 97/23/EC. SKF
Lubrication Systems Germany GmbH classifies
them according to Article 3, Para. 3 of the
Directive. The Declaration of Conformity and
Incorporation forms part of the product docu-
mentation and is supplied together with the
products.