SKF MicroDosage System Assembly Instructions Manual page 12

EN
Page 12
Residual risk
Life cycle: Setup, retrofit
Risk of slipping due to contamination of floor by
spilled or leaked lubricant
Life cycle: Malfunctions, fault-finding
Risk of slipping due to contamination of floor by
spilled or leaked lubricant
Life cycle: Maintenance, repair
Risk of slipping due to contamination of floor by
spilled or leaked lubricant
Life cycle: Decommissioning, disposal
Contamination of the environment with lubricant
and components that have come into contact with
lubricant
Risk of slipping due to contamination of floor by
spilled or leaked lubricant
Remedy
• Proceed carefully when filling the lubricant reservoir using a filler coupling.
• Promptly apply suitable binding agents and remove the leaked or spilled lubricant.
• Follow statutory and company regulations for the handling of lubricants.
• Proceed carefully when filling the lubricant reservoir using a filler coupling.
• Promptly apply suitable binding agents and remove the leaked or spilled lubricant.
• Follow statutory and company regulations for the handling of lubricants.
• Proceed carefully when filling the lubricant reservoir using a filler coupling.
• Promptly apply suitable binding agents and remove the leaked or spilled lubricant.
• Follow statutory and company regulations for the handling of lubricants.
• Properly dispose of lubricants and components that have come into contact with lubricants.
Follow the statutory and company regulations for the handling of lubricants.
• Proceed carefully when filling the lubricant reservoir using a filler coupling.
• Promptly apply suitable binding agents and remove the leaked or spilled lubricant.
• Follow statutory and company regulations for the handling of lubricants.
Assembly instructions