Advantech-DLoG DLT-V83 Series Operating Instructions Manual page 91

Available parameters in the Connection and Security sections:
Connection
Connect automatically when the
network is in range
Connect to a more preferred
network if available
Connect even if the network is
not broadcasting its name (ssid)
The security settings (Figure 11.17: Advanced Security Settings dialog ) must be adapted. These
settings differ depending on the network.
The Security Type must be selected first.
The following options are available:
− No authentication (Open)
− WPA2-Personal
− WPA2-Enterprise
− CCKM
The encryption process (Encryption Type) is then selected.
The options available here depend on the selected Security Type.
− None
− WEP
− AES
DLT-V83 Operating Instructions V2.00
Enable this parameter to set up an automatic
connection to the network.
In the event of multiple profiles being present, this
option can be used to select the preferred profile.
This option can be used to set that a connection is still
established when the name of the network is not being
transmitted.
WLAN configuration
91 / 157