Cleaning The Device; Cleaning The Housing; Cleaning The Touchscreen - Advantech-DLoG DLT-V83 Series Operating Instructions Manual

Maintenance, Cleaning
17.4.

Cleaning the device

Hazardous voltage, electric shock from contact with live parts when cleaning the device.
To prevent an electric shock:

Switch off the DLT-V83 before cleaning.

Disconnect from the power supply.

Disconnect connected accessories.
NOTICE: Property damage
Cleaning touchscreen and housing.

Never use chemical solvents to clean the touchscreen.

Do not use acidic or alkaline solutions.

Do not use cleaning agents that contain ammonia or sulfur (tile cleaners, for example,
contain ammonia).

Do not use any abrasive glass cleaner or cloths that could scratch the touchscreen.

Do not use compressed air, a high-pressure cleaner or vacuum cleaner, as this can
damage the surface.
Using a high-pressure cleaner poses the additional risk of water entering the device and
damaging the electronics or display.
17.4.1.

Cleaning the housing


Ensure that the device is switched off and currentless.

Clean the housing with a damp cloth.
17.4.2.

Cleaning the touchscreen


Device with PCT touchscreen: Switch off the device completely.

Device with resistive touchscreen: Deactivate the touchscreen:

Use a neutral glass cleaner (without ammonia, without isopropyl alcohol)
applied to a lint-free cloth.

NOTICE: Do not apply cleaning agent to the touchscreen; apply it to the cleaning cloth.

Then wipe off the touchscreen with it.

Then use distilled water to remove any residual cleaner.
144 / 157
WARNING
DLT-V83 Operating Instructions V2.00