Operating States - Advantech-DLoG DLT-V83 Series Operating Instructions Manual

Operating the device
9.4.4.

Operating states

62 / 157
Status of LEDs
Supply voltage Temperature
(green)
OFF
OFF
FLASHING
OFF
ON
ON
ON
DLT-V83 Status
(red)
OFF Initial state, idle time – waiting for a new
ignition signal or for the <Power> key after
switch off; no voltage supply.
FLASHING Temperature sensor malfunctioning.
OFF DLT-V83 is in standby mode (S3).
ON Computer will only start if the temperature in
the device is in the range between -30 and
+62 °C again.
OFF Computer start-up/normal operational
state/shutdown delay time.
ON Temperature < -30 or > +70 °C.
FLASHING Temperature sensor malfunctioning.
DLT-V83 Operating Instructions V2.00