Table of Contents
Advertisement
• TO USE CALL PARK
You can park the ongoing call and replace the handset.
The opposite party is placed in hold. You can retrieve
the held call from the original phone or other phone by
using access code.
To Park a Call:
- Press
key during a call in progress.
- Enter CALL PARK access code and the receive Ser-
vice Set Tone.
- Press
key.
POWER
To Retrieve the Call from the Original Phone
- Enter CALL PARK - LOCAL RETRIEVAL access
code and then press
To Retrieve the Call from Other Phone:
- Enter CALL PARK - REMOTE RETRIEVAL
access code (ex. 11) and the station number of the
original phone (ex. 5111) in succession (ex. 11 +
5111).
- Press
key and then connection is established.
• TO USE CALL BACK
You can set CALL BACK if the attempted call
encounters a busy condition.
- Press
key and then dial CALL BACK access
code when the called party is busy.
- Receive Service Set Tone and then press
(Please wait a while until the called party becomes
idle)
key.
POWER
key.
- When the called party becomes idle, your phone
rings.
- Press
key and then receive Ring Back Tone
(The opposite party is ringing).
- Connection is established when the opposite party
answers.
• TO USE CALL WAITING
This feature allows the phone user who has an ongoing
call to receive a second incoming call.
To Activate CALL WAITING - ORIGINATING:
- Dial a phone number - receive Busy Tone.
- Press
key and then dial CALL WAITING
access code.
- Receive Special Ring Back Tone.
- CALL WAITING tone is sent to the busy station.
To Answer the Waiting Call
- CALL WAITING TONE is heard.
- Press
key and then the Waiting Call is auto-
matically connected by placing the opposite party in
hold.
- By pressing
between the original party and the new party.
15
key you can switch the call
Advertisement
Table of Contents
