Toshiba LICSTAR-IV SE Instruction Manual page 82

BLIND Screen
20) Setting the WAIT time for a CUE
20.1) Set the WAIT time for a CUE on the screen.
* The level of the CH on the screen is recorded at the same time.
> WAIT WAIT time
Example) Record 10 seconds of WAIT time for CUE1 on the screen.
> CUE 1 WAIT
Example) Reset and record the WAIT time setting for CUE1 on the screen.
> CUE 1 WAIT
20.2) Set the WAIT time to the specified CUE.
* Wait time setting multiple cues is possible only on the CUESHEET screen.
> CUE CUE number
Example) Record 10 seconds of WAIT time for CUE1.
> CUE 1
Example) Reset and the WAIT time setting for CUE1.
> CUE 1
↵ OK? ↵
↵ OK? ↵
1 0
↵ OK? ↵
RESET
WAIT WAIT time
↵ OK? ↵
WAIT 1 0
↵ OK? ↵
WAIT RESET
↵ OK? ↵
11-16