Table of Contents
Advertisement
SUBMASTER PANEL
(Status of the LED of submaster fader)
Red CROSS LED
Green CROSS LED
Green CROSS LED
CROSS LED
4.2) Example of Submaster Cross Playback Operation
Step 1) Press the CROSS button on the SUBMASTER PANEL to enter the cross mode.
Step 2) Start raising submaster 1 from 0%.
(Cross playback can be cancelled and new cross playback can be started.)
Operation status
IN side
OUT side
Submaster 1 CROSS LED
Step 3) Move submaster 1 to the FL position (cross playback can be cancelled and new cross playback
can be started).
Operation status
Submaster 1 CROSS LED
Step 4) Lower submaster 1 (cross playback can be cancelled and new cross playback can be started).
Operation status
Submaster 1 CROSS LED
Step 5) Start raising submaster 2 from 0%. (Cross playback starts.)
Operation status
IN side
OUT side
Submaster 2 CROSS LED
Submaster 1 CROSS LED
Step 6) Move submaster 2 to the 0% position. (Cross playback can be cancelled and new cross
playback can be started.)
Operation status
Submaster 2 CROSS LED
Submaster 1 CROSS LED
Step 7) Start raising submaster 3 from 0% (cross playback starts).
Operation status
Submaster 3 CROSS LED
Submaster 1 CROSS LED
ON
: Fader on the cross IN side (single)
ON
: Faders on the cross OUT side (multiple)
BLINKING : Faders that cannot be output
OFF
: Excluded from cross playback and ordinary fader functions
:
SUBMASTER1
: None
: OFF
: OFF
: OFF
: SUBMASTER2
: SUBMASTER1
: ON in red
: ON in green
: OFF
: OFF
: ON in red
: ON in green
4-15
Advertisement
Table of Contents
