Table of Contents
Advertisement
EFFECT Screen
2)
The EFFECT NUMBER LIST screen
Press the SHIFT button, and the function display changes as shown below. Press the F3 (E.LIST)
button, and the screen shown below is displayed. To return to the previous screen, press the F3
(EFFECT) button again.
To return to the previous function, press the SHIFT button on the EFFECT screen.
4)
Presetting an EFFECT (on the EFFECT screen)
1)
Specifying a CH level for a STEP
* If a CUE is specified for the STEP in question before operation, that CUE is automatically canceled.
> STEP number = CH number @ Level ↵
Example) Specify the level of CH1 to 50% for STEP1.
> STEP1 = CH1@50 ↵
Example) Specify the level of CH1 to 100% for STEP1.
> STEP1 = CH1@FL ↵
or
> STEP1 = CH1 ↵
Example) Specify the level of CH1 to CH3 to 50% for STEP1.
> STEP1 = CH1 ~ 3@50 ↵
17-4
Advertisement
Table of Contents
