Table of Contents
Advertisement
• Where the device has casters, make sure that they are locked.
Failing to do so may cause injury or electric shock, or damage the device.
• Check if the breaker is tripped.
If it is tripped, eliminate the cause before resetting the breaker.
Not doing so may start a fire, cause an electric shock or damage the device.
• Check if the fuse is blown. If so, be sure to replace it with the same type with the same rating.
Use of a fuse other than the specified one may start a fire or damage the device.
• Make sure that no objects, such as an ashtray or food and drink, are placed on the CONTROL
CONSOLE.
Failing to do so may cause an electric shock or damage the device.
3.
How to use the device
• The device must be handled by a specialist such as a certified stage/television light engineer.
If an unskilled person handles the device alone, problems may be caused.
• Do not subject the device to strong impact.
Doing so may start a fire, cause an electric shock or damage the device.
• Do not touch the device with wet hands.
Doing so may cause an electric shock.
• Do not forcibly pull operation cables.
This may cause an electric shock or damage the device.
• If the breaker is tripped, eliminate the cause before resetting the breaker.
Failing to do so may start a fire, cause an electric shock or damage the device.
• If the fuse is blown, be sure to replace it with the same type with the same rating.
Using the incorrect fuses may start a fire or damage the device.
• Make sure that no objects, such as an ashtray or food and drink, are placed on the CONTROL
CONSOLE.
Failing to do so may cause an electric shock or damage the device.
• Replace parts with the manufacturer's specified genuine products and in accordance with the
instruction manual.
• After a natural disaster such as an earthquake, the device must be inspected by a specialist such
as a certified stage/television lighting engineer before use.
4.
Maintenance and inspection
• The device must be inspected daily. If the results of an inspection show that the device does not
meet any of the standards specified in the instruction manual, deal with the issue according to the
instruction manual.
• The device must be inspected (and maintained) by a specialist such as a certified stage/television
lighting engineer.
If only an unskilled person inspects and maintains the device, a fire may be started, an electric
shock may be caused or the device may be damaged.
Caution
Advertisement
Table of Contents
