Table of Contents
Advertisement
SAVE & LOAD Screen
4)
Loading preset data
* This step loads preset data from the specified folder.
* If no data is saved in the specified folder, data cannot be loaded.
Step 1)
Select DATA LOAD.
> Select DATA LOAD using ↑ or ↓
Step 2)
Select the data to be loaded
Select the data item to be loaded by pressing the F1 (DATA) button or the ▼ button of
"DATA ITEM" and then using the ↑ or ↓ button.
Note that when the ▼ button of "DATA ITEM" is pressed, the list of data items shown
below is displayed, allowing you to select the data to be loaded using the mouse or the ↑ or
↓ button.
This list is not displayed when the F1 (DATA) button is pressed.
Step 3)
Specify the folder to load from
For how to specifying the folder, refer to "9) Specifying the folder for saving or loading
preset data."
Step 4)
Specifying data to be loaded
* The method of specifying data varies with the type of data item to be loaded.
* When loading all of the specified data items if the ↵ button is pressed with no values
specified, the default values are entered automatically.
* For more information, refer to each example shown in "Item 5) Examples of data saving
and loading."
Step 5)
Loading
Press the ↵ button, and "OK?" is displayed to confirm this action.
Press the ↵ button again.
Example)
> Select DATA LOAD using ↑ or ↓
Load all data items.
Select ALL DATA in DATA ITEM ↵ ↵
36-5
Advertisement
Table of Contents
