Control Panel - Toshiba LICSTAR-IV SE Instruction Manual

CONTROL PANEL

CONTROL PANEL
1. CONTROL PANEL Operation
1) MAIN MCCB
1.1) Turning the MAIN MCCB ON
Press the ON (POWER) button.
This turns on the MAIN MCCB of the LIGHTING CONTROL CONSOLE.
Once start processing is complete, the LIGHTING CONTROL CONSOLE is ready for operation.
1.2) Turning the MAIN MCCB OFF
Press the OFF (POWER) button while the ON (POWER) button is lit.
This turns off the MAIN MCCB of the LIGHTING CONTROL CONSOLE after the shutdown process is
complete.
(MAIN MCCB ON status)
ON (POWER) button LED
OFF (POWER) button LED
(MAIN MCCB OFF status)
ON (POWER) button LED
OFF (POWER) button LED
2) Pilot alarm
In the event that a CPU alarm or board alarm is triggered, the ALARM part of the ALARM/BZ STOP
button flashes and the alarm buzzer sounds.
The details of the alarm affecting the LIGHTING CONTROL CONSOLE can be checked on the ALARM
screen of the SETUP PC.
For information on operating the ALARM screen, refer to the relevant pages.
(Status when an alarm is triggered)
ALARM button LED
(Status when no alarm has been triggered)
ALARM button LED
3) Alarm buzzer ON/OFF
Pressing the ALARM/BZ STOP button toggles the alarm buzzer on and off.
(Status when the buzzer sounds in the event of an alarm)
BZ STOP button LED
(Status when the buzzer does not sound in the event of an alarm)
BZ STOP button LED
ON
OFF
OFF
ON
FLASH (The LED is continuously lit when the ALARM screen is displayed.)
OFF
OFF
ON
3-1