Table of Contents
Advertisement
EFFECT PANEL
4.2) Inserting a step from the submaster
Operating procedure
(1) Press the EDIT button above the submaster fader to enter edit mode.
The EDIT button above the submaster fader flashes and the effect assigned to this
submaster is called to the EFFECT PANEL.
After this point the operation will be performed on the EFFECT PANEL.
The EDIT button on the EFFECT PANEL also flashes.
[Press the EDIT button again and the EDIT button goes out and edit mode ends.]
(2) Press the GO/STOP button to stop the effect.
The STEP number where the performance has stopped is displayed on the STEP
number indicator.
At this time, the STEP button lights up.
(3) Press the
(4) Insert an empty step.
Press the INS button.
1)
The INS button lights up.
2) Press the REC button.
When the REC button is pressed, the INS button goes out and an empty step
is inserted.
To stop the step insert operation, press the REC button.
In this case, edit mode is not entered.
Pressing the INS button again while it is lit makes the INS button go out and
cancels the insertion request.
or
button to select a STEP number to be inserted.
5-6
Advertisement
Table of Contents
