Adding A Comment To A Cue - Toshiba LICSTAR-IV SE Instruction Manual

COMMENT INPUT Screen
3) Switching the comment input mode
3.1) Switching to the CH comment input mode
Press the F2 (CH) button.
3.2) Switching to SM comment input mode
Press the F3 (SM) button.
4) Adding a comment
* Before adding a comment, select the appropriate comment input mode.
* To enter characters for the comment, use the keyboard. * Refer to the attached sheet "How to
enter comments."

4.1) Adding a comment to a CUE

> CUE number = Comment characters ↵ ↵
or
> CUE number F5 (COMMENT) Comment characters ↵ ↵
Example) Add the comment "CUE1" to CUE1.
> CUE1 = CUE1
4.2) Adding a comment to a PART
> CUE number PART number = Comment characters ↵ ↵
or
> CUE number PART number F5 (COMMENT) Comment characters ↵ ↵
Example) Add the comment "PART1" to PART1 of CUE1.
> CUE1 = PART1
4.3) Adding a comment or comments to CH(s)
> CH number(s) = Comment characters ↵ ↵
or
> CH number(s) F5 (COMMENT) Comment characters ↵ ↵
Example) Add the comment "LB1-1" to CH1.
> CH1 = LB-1
4.4) Add a comment or comments to SM(s)
> SM number(s) = Comment characters ↵ ↵
or
> SM number(s) F5 (COMMENT) Comment characters ↵ ↵
Example) Add the comment "LB1-1" to SM1.
> SM1 = LB-1
4.5) Adding a comment or comments to EFFECT(s)
> EFFECT number(s) = Comment characters ↵ ↵
or
> EFFECT number(s) F5 (COMENT) Comment characters ↵ ↵
Example) Add the comment "EFFECT1" to EFFECT1.
> EFFECT1 = EFFECT1
↵ OK? ↵
↵ OK? ↵
↵ OK? ↵
↵ OK? ↵
↵ OK? ↵
32-2