Assigning A Profile Curve Pattern To Dimmer(S) - Toshiba LICSTAR-IV SE Instruction Manual

DIMMER DATA Screen
8)

Assigning a Profile Curve Pattern to dimmer(s)

* Pattern1 (Approximate 2 Square Curve) is not displayed even if it is assigned.
> Dimmer name(s) = Select Profile by ↑ or ↓
Example)
> DIM 2S2 = Prof.3 ↵ OK? ↵
9) Resetting the assignment of a Profile Curve Pattern to dimmer(s)
* When a pattern assignment is reset, Pattern1 (Approximate 2 Square Curve) is applied.
> Dimmer name(s) = Select Profile by ↑ or ↓
Example) Reset the assignment of a Profile Curve Pattern to 2S2.
> DIM 2S2 = Prof. RESET OK? ↵
10) Setting NDM for dimmer(s)
* When NDM setting is carried out, dimming operation switches to non-dimming operation (on/off).
* Profile Curve Pattern27 (NDM) is used for NDM control.
> Dimmer name(s) = Select NDM by ↑ or ↓
Example)
> DIM 2S2 = NDM1 ↵ OK? ↵
11) Resetting an NDM for dimmer(s)
> Dimmer name(s) = Select NDM by ↑ or ↓
Example)
> DIM 2S2= NDM RESET OK? ↵
12) Setting a Prop. level to dimmer(s)
* Prop. level 100% is not displayed even if it is assigned.
> Dimmer name(s) = Select Prop. level by ↑ or ↓
Example)
> DIM 2S1 = Prop.@30 ↵ OK? ↵
13) Resetting a Prop. level for dimmer(s)
* When a Prop. level is reset, Prop. level 100% is applied.
> Dimmer name(s) = Select Prop. level by ↑ or ↓
Example)
> DIM 2S1 = Prop.@ RESET OK? ↵
Assign Profile Curve Pattern3 to 2S2.
Set 2S2 to NDM1.
Reset NDM for 2S2.
Set 2S1 to Pro. Level 30%.
Reset the Prop. level for 2S1.
Pattern number ↵ ↵
RESET ↵
1 ↵ ↵
RESET ↵
Level ↵ ↵
RESET ↵
22-3