Table of Contents
Advertisement
PATCH Screen
8)
Assigning a CH to specified dimmer(s)
> F1 (CH) CH number = F2 (DIM) Dimmer name(s) ↵
If the specified CH does not have the specified dimmer assigned, press the ↵ button once to assign
the dimmer to the CH.
If the specified CH already has the specified dimmer assigned, press the ↵ button twice to assign the
dimmer to the CH.
Example) Assign CH1 to 2S1.
> CH1 = DIM 2S1 ↵
9)
Simplified CH and dimmer specification
→ button: Increments the CH number in the command line by 1.
← button: Decrements the CH number in the command line by 1.
↑ button:
Decrements the dimmer number in the command line by 1.
↓ button:
Increments the dimmer number in the command line by 1.
Example) Assign 2S2 to CH1. Example) Then assign 2S3 to CH2.
> CH1= DIM 2S2 ↵
Press the → button.
> CH2= DIM 2S2
Press the ↓ button.
> CH2= DIM 2S3
Press the ↵ button.
> CH2= DIM 2S3 ↵
10) Resetting the assignment of dimmer(s) to CH(s)
10.1) Resetting the assignment of specified dimmer(s) to CH(s)
> F2 (DIM) Dimmer name(s) RESET ↵
Example) Reset 2S1 assignment to CH.
> DIM 2S1 RESET ↵
10.2) Resetting the assignment of specified CH(s) to a dimmer
> F1 (CH) CH number(s) RESET ↵
Example) Reset the assignment of CH1 to a dimmer.
> CH1 RESET ↵
21-4
Advertisement
Table of Contents
