Table of Contents
Advertisement
SUBMASTER PANEL
7)
Changing submasters' functions from INHIBIT to PILEON
Operating procedure
(1) Press the INH. button. The INH. button lights up.
(2)
Press the REC/
INHIBIT function is to be changed to the PILEON function.
Pressing the REC/
Pressing the REC/
and performs the function change.
If the function does not need to be changed, press the CANCEL button.
Pressing the INH. button again while it is lit makes the INH. button go out and
cancels the function change request.
Notes
• When the submaster function changes from INHIBIT to PILEON, it switches to the submaster defined
on the actual page.
However, freezing does not take place even when the submaster fader is up, so it is recommended
that switching to PILEON should be performed after both the output of the channel targeted for
INHIBIT and the submaster fader are set to 0 to avoid a sudden change of lights.
• A frozen submaster cannot be changed.
button twice above the submaster fader for which the
button once makes the REC/
button again makes the REC/
button flash.
button and INH. button go out
4-6
Advertisement
Table of Contents
