Table of Contents
Advertisement
• Turn the power off before inspecting or cleaning the device.
Failing to do so may cause an electric shock.
• Do not forcibly pull operation cables.
This may cause an electric shock or damage the device.
• Do not subject the device to strong impact.
Doing so may start a fire, cause an electric shock or damage the device.
• Turn the power off before removing the panel.
Failing to do so may cause an electric shock.
• Be careful when removing the panel.
The panel may fall, causing injury.
• Do not touch the device with wet hands.
Doing so may cause an electric shock.
• To maintain safe and normal operation of the device, it must be periodically inspected and
maintained by the manufacturer or a specialist.
• Replace parts with the manufacturer's specified genuine products and in accordance with the
instruction manual.
Failing to do so may start a fire, cause an electric shock, or damage the device.
5.
Troubleshooting
• In abnormal circumstances, such as when the device is producing smoke or giving out a foul smell,
turn off the power immediately.
Not doing so may start a fire or cause an electric shock.
• After the symptoms of the malfunction subside, investigate its cause.
If you cannot readily find the cause, please contact us for repairs.
• After a natural disaster such as an earthquake, the device must be inspected by a specialist such
as a certified stage/television lighting engineer before use.
Inspection by an unqualified person may start a fire, cause an electric shock or damage the device.
6.
Storage
• Do not store this device in a location exposed to direct sunlight, high temperature, high levels of
humidity, dust, corrosive gases, vibration, impact, etc.
Leaving it in such conditions so may damage the device or its insulation.
• Inspection must be carried out when the device is used after being stored for a long period of time.
Otherwise, a fire may be started, an electric shock may be caused, or the device may be damaged.
Caution
Advertisement
Table of Contents
