Toshiba LICSTAR-IV SE Instruction Manual page 157

PROFILE CURVE Screen
PROFILE CURVE Screen
1. Function
This screen allows you to create a profile curve pattern and set comments for a pattern.
Created curves can be assigned to dimmers on the DIMMER DATA screen.
A comment can be a maximum of 10 characters long.
2. Types of Curves
Pattern No.
1
2 Approximate 1.7 square curve (fixed)
3 Approximate 2.3 square curve (fixed)
4 Approximate 2.7 square curve (fixed)
5
6
.
.
.
26
27
* Pattern No. 27 is reserved for the NDM (non-dim module).
* Unlike other patterns, only curves that change from 0% to 100% by cut change can be entered.
(Settings that can be input)
100%
0%
Description
Approximate 2 square curve (fixed)
Approximate 3 square curve (fixed)
(Can be changed.)
NDM curve (Can be changed.)
100%
100% 0%
(Settings that cannot be input)
100%
100% 0%
24-1
100%