Submaster Panel - Toshiba LICSTAR-IV SE Instruction Manual

SUBMASTER PANEL

SUBMASTER PANEL
1. Recording Operation
1) Recording submaster performance
Operating procedure
(1) Press the LIVE REC button.
(2) To record the lighting, press the REC/
fader which is to be recorded.
When making a new recording, press the REC/
When overwriting a recording
button flashes. Then press the REC/
and the actual lighting is recorded.
When not overwriting a recording, press the CANCEL button.
[REC/ button LED display status]
ON (red) : Recording complete
FLASH (red)
OFF (red)
FLASH (green) : Freezing (*1) is in progress.
*1: Freezing is a function to maintain the assignment without changing it until the fader is set to
0%.
Notes
• Freezing takes place if a channel is assigned to a submaster to which a cue or effect has already
been assigned. Freezing does not take place if a channel is added to or deleted from a submaster to
which a channel was already assigned.
• Freezing takes place if a new cue is assigned to a submaster to which a cue was already assigned.
• Only one cue is assigned to each submaster.
, press the REC/
: Confirming overwrite-recording, edit recording, or memory deletion
: Not yet recorded.
button above the submaster
button once.
button once and the REC/
button again and REC/
4-1
button goes out