Table of Contents
Advertisement
BLIND Screen
13.4)
Change the level(s) geometrically
Rotate the level wheel upward to raise the level of the specified CH on the screen.
Rotate the level wheel downward to lower the level of the specified CH on the screen.
Example) Raise of lower the level of CH1 geometrically using the level wheel.
> 1
% Level wheel
The COMMAND line on the screen displays the level at the time after %.
14) Specifying CH levels in groups
14.1)
Specify CH levels in groups.
> GROUP
Group number
Example 1) Set the levels of the CHs assigned to GROUP1 to 100%.
> GROUP
Example 2) Set the levels of the CHs assigned to GROUP1 and GROUP3 to 50%.
> GROUP
Example 3) Set the levels of the CHs assigned to GROUP4 to GROUP7 to 8%.
> GROUP
14.2)
Restore the levels of the CHs in groups to the most recently specified levels on the screen.
* This operation cannot restore the level of any CH to that before the most recently specified one.
@UNDO
Example) Set the levels of CHs assigned to GROUP1 to 100%, then to 50%, and then restore them to
100%.
> GROUP
> GROUP
> GROUP
14.3)
Restore the levels of CHs in groups to the recorded values.
> GROUP
Group number
Example) Restore the levels of the CHs assigned to GROUP1 to the recorded values.
> GROUP
14.4)
Keep the levels of CHs in groups unchanged in this CUE.
> GROUP
Group number
Example) Keep the levels of the CHs assigned to GROUP1 unchanged in this CUE.
> GROUP
↑
@
Level
1
@FL
1
+
3
@
5
0
∼
4
7
@
0
8
1
@FL
1
@
5
0
1
@UNDO
@
RETURN
1
@RETURN
@
RESET
1
@
RESET
11-9
Advertisement
Table of Contents
