Table of Contents
Advertisement
WORKING LIGHT PATCH Screen
3)
How to enter dimmer names
* Refer to the attached sheet "How to enter dimmer names."
4)
Assigning dimmer(s) to WORKING LIGHT
> F3 (DIM) Dimmer name(s) ↵ ↵
Example)
Assign 2S1 to WORKING LIGHT.
> DIM 2S1 ↵ OK? ↵
5)
Resetting the assignment of dimmer(s) to WORKING LIGHT
> F3 (DIM) Dimmer name(s) RESET ↵
Example) Reset the assignment of WORKING LIGHT to 2S1.
> DIM 2S1 RESET OK? ↵
6)
Clearing the assignment of all dimmer(s) to WORKING LIGHT
> F7 (ALLCLR) ↵
7)
Initializing the assignment of dimmer(s) to WORKING LIGHT
> F17 (DEFALT) ↵
10) Changing the actual scenes and preset scenes
* Refer to the attached sheet "How to change scene numbers"
11) Scene-copying the assignment of dimmers to WORKING LIGHT
* After scene copying is performed, the preset scene automatically switches to the copy destination
scene.
> F15 (SCENE) Copy source scene number COPY Copy destination scene number ↵ ↵
Example)
Copy scene 1 to scene 2.
> SCN1 COPY SCN2 ↵ OK? ↵
23-2
Advertisement
Table of Contents
