Table of Contents
Advertisement
DIMMER DATA Screen
23) Initializing the assignment of specified data for all dimmers
Step 1)
Use the left mouse button to select a data item to be initialized from among those below
"DIMMER" at the left of the screen.
*
*
initialized.
Step 2)
Execute I
> F17(DEFALT) ↵
Example)
> WL DEFAULT OK? ↵
Example)
> NDM DEFAULT OK? ↵
24)
Scene copying the specified data of all d
* The data in the preset scene is copied.
* Even after copying, the preset scene does not switch to the copy destination scene.
Step 1)
Use the left mouse button to select a
"DIMMER" at the left of the screen.
Step 2)
Execute COPY.
> COPY Copy destination scene number ↵ ↵
Example)
> Prof. Scene 6 COPY Scene 3 ↵ OK? ↵
Example)
> All Data Scene 6 COPY Scene 3 ↵ OK? ↵
25)
Changing the actual scenes and preset scenes
* Refer to the attached sheet "How to change scene numbers"
Data without an initial value cannot be selecte
When All Data is selected, the assignments of all data with initial values are
NITIALIZE.
Initialize the
assignment of Working Light to all dimmers.
Initialize NDM
settings to all dimmers.
Copy the assignment of a Pro
Copy all data of scene 6 to scene
d.
immers
data item to be copied from among those below
file Curve Pattern to scene 6 to scene 3.
3.
22-6
Advertisement
Table of Contents
