Toshiba LICSTAR-IV SE Instruction Manual page 257

Lighting control console
Table of Contents

Advertisement

Terms
DOWN DELAY
DOWN FADE
TOUCH SWITCH
CHASE
CHANNEL
CHANNEL GROUP
CHANNEL TRACK
CHANNEL LEVEL
DIMMER
LIGHTING OUTPUT CURVE
DMX
DISPLAY
DIMMER
DIMMER GROUP
DELAY
DEFAULT
DELETE
TEN-KEY
ARITHMETICAL MODE
GEOMETRICAL MODE
TRACKING
TRACKSHEET
NEXT
NEXT CUE
NDM
PART
PART WHEEL
PILEON
PATCH
PATCH SCENE
HEAT UP
FADER
FADE
FORWARD
LOAD CIRCUIT
DIMMER NAME
Delay time of the channel the level of which is lowered
compared to the preceding cue
Fade time of the channel the level of which is lowered
compared to the preceding cue
TOUCH
Button to output 100% lighting
CHASE
Effect
CH
The smallest unit of the control system that can be both
lighting-controlled and displayed
Group
CH TRACK
A screen mode where one channel level is displayed or set
over multiple cues
Dimming level assigned to channels
Equipment that increases or decreases the light level of a
connected load continuously
Dimmer fading curve. A different fading curve is obtained by
setting a profile curve.
DMX、DMX-512/1990 A digital transmission standard for lighting control specified by
a project sponsored by the USITT Engineering Commission
DISPLAY
Data display screen
Load circuit
Function to group data for specifying multiple dimmers
Time between the start of a cue and the beginning of fading.
Delay is divided into updelay and downdelay
Default time
DEL
Button for deleting recorded data
Numeric buttons (0 to 9)
A mode where the CH level value is edited arithmetically from
the current value.
E.g. Level 50 becomes level 40 if lowered by 10%.
A mode where the CH level value is edited geometrically from
the current value.
E.g. Level 50 becomes level 45 if it is lowered by 10%.
A method for recording cue data. This method allows the
channel levels to be recorded for the specified cue and for
later cues.
A screen mode where multiple channel levels are displayed or
set over multiple cues.
Meaning the next
The cue after the actual cue.
NDM
The mode where the dimmer is disabled (turned off)
Divides a channel compromising cues into different times for
A wheel used to adjust the playback time of a part or to play
back a part manually.
Outputs the assigned CH level from a submaster fader. When
the same CH is assigned to more than one submaster, the
highest CH level is output
Connects a channel to the dimmer
A unit of recorded data from a patch.
A technique that increases the lighting speed of lamps by
producing several percent of output before adding lamp
output.
A control for obtaining fading effects.
Changes the brightness gradually
F
Specifies the next recording number
A dimmer and the receptacle and apparatus connected to the
dimmer.
The name of a dimmer
48-2

Advertisement

Table of Contents
loading

Table of Contents