Toshiba LICSTAR-IV SE Instruction Manual page 35

SUBMASTER PANEL
11) Sequential effect assignment to submasters
Operating procedure
(1) Press the SEQ button.
The SEQ button lights up.
(2) Select a PATTERN number to be assigned.
Procedure 1)
1) Select a PATTERN number to be assigned on the EFFECT panel.
1. Press the PATT button.
2. Press the
The selected number is displayed on the PATTERN number indicator.
2) Press the
Procedure 2)
1) Press the EFFECT button on the SETTING panel and then use the
numerical keys to input a PATTERN number.
The number input is displayed on the command line of the SETTING screen.
2) Press the
(3) Press the REC/
be assigned.
Pressing the REC/
Pressing the REC/
submaster for which the REC/
order in which they are recorded until the last submaster, starting with the specified
PATTERN number.
When sequential assignment is not required, press the CANCEL button.
Pressing the SEQ button again while it is lighting makes the SEQ button go out
and cancels the sequential assignment request.
[SEQ button LED status]
ON : Sequential assignment of cues, channels, and effects is possible.
Notes
• Sequential assignment is disabled for the submasters for which LOCK or INHIBIT
functions are active.
• Even if the REC/
is not carried out.
or button to select a PATTERN number.
button on the EFFECT panel.
button on the SETTING panel.
button twice above the submaster to which pages are to
button once makes the REC/
button again makes the SEQ button go out. After the
button was pressed, patterns are assigned in the
button above a frozen submaster is pressed, sequential assignment
button flash.
4-9