Lighting System Operation Panel - Toshiba LICSTAR-IV SE Instruction Manual

LIGHTING SYSTEM OPERATION PANEL

LIGHTING SYSTEM OPERATION PANEL
1) Switching to the DMX board
In case the DMX board in the LIGHTING CONTROL CONSOLE or DIMMER CABINET fails, the DMX
board in the alternative system can be switched in by pressing the HCU1/HCU2 button.
(The LIGHTING CONTROL CONSOLE is operated by the DMX board in system 1.)
HCU1 button LED
HCU2 button LED
(The LIGHTING CONTROL CONSOLE is operated by the DMX board of system 2.)
HCU1 button LED
HCU2 button LED
2) Maintaining the lighting output level from the LIGHTING CONTROL CONSOLE
In case the LIGHTING CONTROL CONSOLE fails to respond, it can be restarted without changing the
current lighting level at that time.
To maintain the lighting level, press the LEVEL HOLD button.
Then, restart the LIGHTING CONTROL CONSOLE. After the LIGHTING CONTROL CONSOLE starts,
press the LEVEL HOLD button again the moment lighting at the same level as that being maintained is
obtained. This causes the level hold to be released and the lighting output level returns to normal
operation.
(LEVEL HOLD button LED status)
LEVEL HOLD button LED
CONSOLE is being maintained.
LEVEL HOLD button LED
• While the level is being maintained, whichever level is the higher out of that being maintained or that
from the LIGHTING CONTROL CONSOLE is given priority.
• When the level hold is released, the level being maintained fades out in 5 seconds.
3) Resetting Shut-Off DIMMER MODULE
* Press the RESET button after clearing the cause of the DIMMER MODULE shut-off.
Otherwise, the DIMMER MODULE will shut off again.
By pressing the RESET button after clearing the cause of the DIMMER MODULE shut-off, the module
will return to normal status.
(RESET button LED status)
RESET button LED
RESET button LED
RESET button LED
ON
OFF
OFF
ON
ON : The lighting output level from the LIGHTING CONTROL
OFF : Normal operation.
ON : There are modules that have been shut-off.
OFF : No modules have been shut-off.
FLASH : The reset process is in progress.
2-1