Seca 103 Instructions For Use Manual page 83

Measuring procedure
Integration module
Network or Power LED solid green
Workflow LEDs solid green
Network or Power LED solid green
Workflow LEDs solid green
Workflow LEDs flashing green
Workflow LEDs solid green for
approx. 5 seconds
Network or Power LED solid green
If result seems implausible go through COMPLETE measuring procedure again.
seca Version 6, July 2/2018
Device Patient
NOTE
Annex: Quick reference: Measurement procedure • 83
User
• Make sure device is switched on.
• Make sure power and network LEDs are solid green.
Enter ID(s) as stated in "Device settings".
Ask patient to step on device.
Wait till display shows result permanently.
Scan "confirm" bar code if device is set accordingly (see
"Device settings").
• Wait till workflow LED is solid green.
• Ask patient to step off device.
• Wait till workflow LED goes out.
• Measurement result remains in display.
• Device is ready for new measurement procedure.
English
Page 2/2