Seca 103 Instructions For Use Manual page 36

36 • /
seca connect 103 seca 452
3. In the
Connectivity manager
The following integration modules are displayed:
Integrations module
Cerner VitalsLink
seca TestModule
BasicModule
XMLModule
4. Click on the appropriate integration module.
The parameter list for the module is displayed (here: Cerner VitalsLink).
5. Define the settings for the parameters of the integration module
➔
Integration module Cerner VitalsLink:
6. Scroll down in the dialog window.
The and
save activate
7. Click .
save
The settings will be saved.
8. To use the integration module, click
The previously used integration module is deactivated automatically.
NOTE
• For all available integration modules, you can save presets, but you
can only activate one integration module each.
• If you activate an integration module without saving, the settings are
discarded as soon as you activate a different integration module.
9. Restart the service "seca 103.dll" seca(in Windows
"Task Manager\Services").
The system is ready for operation.
tab, click on the drop-down menu.
Use
Connection to Cerner EMR systems with
VitalsLink interface
For test purposes during system set up
For future system upgrades, currently no
function
For future system upgrades, currently no
function
Parameter.
buttons are visible.
.
activate
® under