Connecting And Installing The Seca 452 Interface Module; Selecting A Location - Seca 103 Instructions For Use Manual

6. CONNECTING AND INSTALLING THE SECA 452 INTERFACE
MODULE

6.1 Selecting a location

➔
Selecting a location
➔
Retrofitting baby scales 757/727
➔
Retrofitting multi-functional scales 635/634, 657/656, 675/674 (models
with cabled remote display)
➔
Retrofitting multi-functional scales 645/644, 665/664, 667, 677/676, 685/
684 (models with mounted display)
➔
Mounting the seca 452 interface module to the wall
➔
Retrofitting column scale 704
➔
Retrofitting measuring stations 285/284, 287/286
➔
Performing final work
NOTE
For seca measuring devices with an internal interface module (for
example,
seca 336 i
NOTE
The interface module is available in two versions (set no.
seca 452
4520050009 for seca scales and set no. 4520000009 for seca mea-
suring stations). The complete scope of delivery can be found in the
device description, which is included with the sets.
The interface module can be mounted on the wall or placed next to
seca 452
the scale. For column scales and measuring stations, the
module is installed directly on the measuring device.
► Take the following into account when you select the location for the
interface module:
seca 452
• For wall installation: At the installation point, there must be no lines in
the wall that could be drilled into.
• Fluids cannot penetrate into the connections.
• Cables are not kinked and not subject to mechanical stress.
• Cables are sufficiently long to be able to move or tilt the measuring
device (for example, for cleaning).
• The scanner cable is long enough to be able to operate the scanner.
• LEDs can be read easily.
NOTICE!
Damage to device due to incorrect device set up
If the original device location changes due to retrofitting, the device
must be correctly set up at the new location.
► Follow the information in the section "Setting up the device" in the
corresponding instructions for use.
Connecting and installing the seca 452 interface module • 37
), no interface module is needed.
seca 452
English
interface
seca 452