Installing The Seca 452 Interface Module; Installing The Scanner Bracket - Seca 103 Instructions For Use Manual

2.2 Installing the seca 452 interface module

2.3 Installing the scanner bracket

86 • /
seca connect 103 seca 452
1. Screw the bracket to the column bracket with two hex head socket
screws.
2. Press the column bracket onto the column at the height of the power
supply connection.
NOTE
The power supply connection is no longer needed, the column
bracket can completely cover the power supply connection.
3. Press the interface module into the bracket.
seca 452
1. Attach the scanner bracket to the desired side part of the display housing.