Preparing The Scale - Seca 103 Instructions For Use Manual

Preparing the scale

42 • /
seca connect 103 seca 452
Pos.
f Cross-head screw
NOTE
• The interface module is connected between the cabled
seca 452
remote display and the scale. Select the short or long connecting
cable, depending on the distance of the cabled remote display to
the scale.
• The scanner brackets from the
wall installation. Use a suitable scanner bracket from the scanner
manufacturer. Follow the instructions in the respective installation
instructions.
Depending on the installation and connection version, you may need the
following tools (not included in the scope of delivery):
2
1
Pos. Component
1 Cross-head screwdriver
2 Cross-head screwdriver
3 Drill
4 Wall plug
5 Ethernet cable
1. Switch off the scale.
2. Disconnect the power supply unit from the power supply socket.
3. Pull the power cable out of the scale.
Component
sets are not intended for
seca 452
3
4
Pcs.
2
5
Size Pcs.
PH 1 1
PH 2 1
Ø 5 mm 1
Ø 5 mm 2
n/a 1