Exporting The Device List; Deleting A Device; Managing Integration Modules - Seca 103 Instructions For Use Manual

Exporting the device list

Deleting a device

5.3 Managing integration modules

You can export the device list, for example for documentation purposes, as a
.csv file.
1. Click
Export device list
The device list is exported.
2. Save the device list, for example for documentation purposes.
NOTE
Importing device lists is
You can clean up the
Device list
the list that have the status
seca measuring devices are displayed under the following conditions as
:
Offline
• Switched off/no power supply
• WiFi connection disconnected
• Ethernet cable was removed
• Device error
Connection data is saved on the seca measuring device or on the respective
interface module. For this reason, the seca measuring device auto-
seca 452
matically appears in the Device list
To delete devices from the
Offline
1. Save the current device list as a .csv file ➔
2. Click in the Device list
3. Click .
delete device
The seca measuring device is deleted from the
device ready for operation ➔ Troubleshooting.
4. Get the Offline
The seca measuring device appears in the
.
Online
NOTICE!
Malfunction and incorrect data allocation
Incorrect or incomplete settings in the respective EMR system or in
the integration modules can lead to malfunction in the overall system
or to incorrect allocation of measurement results.
► Only make settings for your EMR system in consultation with the
manufacturer of your EMR system.
1. If necessary, make the settings directly on your EMR system.
2. In the menu bar of the
.
possible.
not
by deleting seca measuring devices from
.
Offline
once it is Online .
, proceed as follows:
Device list
Exporting the device
on the Offline device.
Device list
Device list
, click Connectivity manager
seca connect 103
Operating seca connect 103 • 35
English
list.
.
once it is back
.