Annex: Quick Reference: Measurement Procedure - Seca 103 Instructions For Use Manual

18.ANNEX: QUICK REFERENCE: MEASUREMENT PROCEDURE

Quick reference: Measuring procedure for network integrated seca device
Device identification
Server address (seca connect 103):
Device settings
Identification mode
Confirm measurement at device
Use these features as indicated only:
Notice: Failure to use these features as indicated below will result in invalid values being transferred to the EMR.
Applicable to this device?
What to do if....
Integration module
Workflow LEDs solid red
Network LED flashing green
Network or Power LED flashing or
solid red
82 • /
seca connect 103 seca 452
Device name:
Device type:
Device location:
Port:
Feature
hold key
bmi key
*
send/print
tare
2 in 1
clear key
BMIF
* Exception: Use send button on head slide of seca 285/284 as usual.
Device
OFF
Manual (no bar codes)
Scan Patient ID
Scan Patient ID and User ID
Yes
No
Deactivate feature after each measurement to clear tare
value from memory
• Deactivate ultrasound length measurement feature
(e.g. in models seca 287/286) before measurement
• Deactivate 2 in 1 feature after each measurement
to clear value from memory
Press key before each measurement to clear obsolete
length value from memory
Deactivate feature before confirming measurement
Patient
Data transmission error
• Ask patient to step off device.
• Wait till workflow LEDs go out.
• Go through COMPLETE measuring procedure.
Establishing network connection.
• Wait till network LED ist solid green.
• Then start measuring procedure.
Malfunction, contact administrator.
Use this feature?
Do not use!
Do not use!
Do not use!
User
Page 1/2