Seca 103 Instructions For Use Manual page 67

c) Connect cable to interface 2 of the
3. Connect the measuring station to the
a) Connect the connecting cable to interface 1 of the
interface module
b) Push the connecting cable down through the hole and connect to
the electronics box
4. Carefully place the measuring station onto the ground horizontally.
You have the following options to continue:
► For communication via Ethernet, continue with step 5.
► For communication over WiFi, continue with step 6.
Connecting and installing the seca 452 interface module • 67
interface module
seca 452
interface module:
seca 452
1
2
English
seca 452