Preparing The Data Connection (Wifi/Ethernet) For Seca Measuring Devices; Configuring The Firewall - Seca 103 Instructions For Use Manual

Preparing the data connection
(WiFi/Ethernet) for seca measuring
devices

Configuring the firewall

24 • /
seca connect 103 seca 452
seca measuring devices can transfer data via WiFi or via Ethernet to the
. The type of data connection can be selected separately for
seca connect 103
each connected seca measuring device.
When preparing the data connection (WiFi/Ethernet), the following factors
must be taken into account:
• seca measuring devices used ➔
– seca measuring devices with internal interface module (for example,
): Exclusively WiFi
seca 336 i
– seca measuring devices with
example,
seca 704
• Technical and structural conditions in your institution:
– Network structure and capability
– Length of the data transmission paths
– Location of the seca measuring device, possible obstacles between
transmitter and receiver, for example, other medical devices,
furniture
– Properties of ceilings and walls
Depending on the data connection, the following preparation work is
necessary:
► Assign IP addresses for seca measuring devices (static IP addresses
recommended)
► WiFi: Network definition/new setup
► Ethernet: Patch network socket at location of seca measuring device
The settings in the Windows
text. If you use a different firewall, define the settings accordingly. Work
through the individual dialog windows and then click on
1. Open the firewall dialog window ("Windows Administrative
Tools\Windows Defender Firewall with Advanced Settings").
2. Create a new rule:
a) Click "Connection Security Rules"
b) Click "New Rule"
3. Under "Rule Type", click "Custom".
Compatible seca measuring
interface module (for
seca 452
): Ethernet or WiFi
® Defender Firewall are described in the following
devices:
.
Next