Installing The Scanner Bracket - Seca 103 Instructions For Use Manual

Installing the scanner bracket

1. Put a hex head socket screw into the sliding block.
2. Thread the sliding block below the multi-functional display into the groove
of the column.
3. Hold the sliding block securely.
4. Position the scanner bracket on the sliding block.
5. Push the scanner bracket with the recess upward under the head of the
hex head socket screw.
6. Screw the hex head socket screw tight.
7. Screw the scanner bracket tight with a second hex head socket screw.
Connecting and installing the seca 452 interface module • 65
English