Retrofitting Baby Scales 757/727 - Seca 103 Instructions For Use Manual

6.2 Retrofitting baby scales 757/727

38 • /
seca connect 103 seca 452
➔
Preparing the scale
➔
Connecting a seca 452 interface module
➔
Mounting the seca 452 interface module to the wall
➔
Performing final work
You need the following parts from set no. 4520050009:
a
f
Pos.
a interface module
seca 452
b Bracket
c Power supply unit
d Connecting cable, long
e Connecting cable, short
f Cross-head screw
NOTE
• Select the long connecting cable if you want to mount the
interface module to the wall or position it next to the scale at a signif-
icant distance. Select the short connecting cable if you want to
place the
seca 452
• The scanner brackets from the
wall installation. Use a suitable scanner bracket from the scanner
manufacturer. Follow the instructions in the respective installation
instructions.
Depending on the installation and connection version, you may need the
following tools (not included in the scope of delivery):
1
Pos. Component
1 Cross-head screwdriver
2 Drill
3 Wall plug
4 Ethernet cable
b
c
e
or
Component
interface module directly next to the scale.
sets are not intended for
seca 452
2
3
d
Pcs.
1
1
1
1
1
2
seca 452
4
Size Pcs.
PH 2 1
Ø 5 mm 1
Ø 5 mm 2
n/a 1