Seca 103 Instructions For Use Manual page 33

2. Scan the QR code with the scanner that is connected to the seca
measuring device or to the respective
The settings are transferred to the seca measuring device or the
respective interface module.
seca 452
The transmission is completed once the firmware version of the added
seca measuring device is shown under
You have the following options to continue:
► To add an additional seca measuring device, go back to step 1.
► To define
settings, continue with step 3.
WiFi
3. Enter the parameters of the WiFi network under
• SSID
• Password
The QR code for the WiFi
4. Scan the QR code with the scanner that is connected to the seca
WiFi
measuring device or to the respective
The settings are transferred to the seca measuring device or the
respective interface module.
seca 452
Connecting the seca measuring device is complete.
5. Repeat the procedure for all seca measuring devices that you want to
connect with the
seca connect 103
interface module.
seca 452
Device settings
WiFi
settings is generated automatically.
interface module.
seca 452
.
Operating seca connect 103 • 33
English
.
: