3
. INSPECTION/ADJUSTMENT
AIR CLEANER
AIR CLEANER REPLACEMENT
Remove the air cleaner case cover by
removing the 7 screws.
Remove the air cleaner element by removing
the four screws.
Check the element and replace it if it is
excessively dirty or damaged.
CHANGE INTERVAL
More frequent replacement is required when
riding in unusually dusty or rainy areas.
*
The air cleaner element has a viscous
type paper element. Do not clean it
with any fluid.
Be sure to install the air cleaner
element and cover securely.
SPARK PLUG
Remove the spark plug.
Check the spark plug for wear and fouling
deposits.
Clean any fouling deposits with a spark plug
cleaner or a wire brush.
Specified Spark Plug:
NGK CR7HSA
Measure the spark plug gap.
Spark Plug Gap: 0.6~0.7mm
*
When installing, first screw in the spark
plug by hand and then tighten it with a
spark plug wrench.
Air Cleaner Case Cover
Screws
Air Cleaner Element
Gap, Wear, and
Fouling Deposits
Cracks
Damage
Super 8
50
①
Washer
Deformation
3-4