Ignition Coil; Continuity Test - KYMCO Super 8 50 Service Manual

15
. IGNITION SYSTEM

IGNITION COIL

REMOVAL
Remove the met-in box. (  2-3)
Remove the spark plug cap.
Disconnect the ignition coil wires and remove
the ignition coil bolt and ignition coil.
INSPECTION

CONTINUITY TEST

Measure the resistance between the ignition
coil primary coil terminals.
Resistance: 0.1～1.0
Measure the secondary coil resistances with
and without the spark plug cap.
Resistances:
(with plug cap)
(without plug cap) : 3～5K
＊
Correctly operate the tester following the
manufacturer's instructions.
3
: 7～12K
Ignition Coil
Super 8 50