5. FUEL INJECTION SYSTEM
Super 8 50
ROLL SENSOR
The engine should be stop when the vehicle
incline over 65° for safety. When you place the
vehicle back to normal position, you have to
key-off and key-on the switch again, then it can
be restarted.
Standard:
Normal: 0.4~1.4V
Fall down > 65° : 3.7~4.4 V
Roll sensor
TP SCREW
Don't adjust the TP screws, they should be
adjusted by KYMCO.
If TP screw lost of the original position, it may
cause to unstable problem.
TP screws
5-16