Exhaust Muffler Removal - KYMCO Super 8 50 Service Manual

2
. FRAME COVERS/EXHAUST MUFFLER
Remove the decorative ring.
Remove the leg shieid.
The installation sequence is the reverse of
remove

EXHAUST MUFFLER REMOVAL

Disconnect the O₂ Sensor connector.
Remove the two exhaust muffler joint lock
nuts.
Remove the two exhaust muffler lock bolts.
Remove the exhaust muffler.
Remove the exhaust muffler joint packing
collar.
When installing, first install the exhaust
muffler packing collar and then install the
exhaust muffler.
First install and tighten the exhaust muffler
joint lock nuts. Then, install and tighten the
exhaust muffler lock bolts.
Connect the O₂ Sensor connector.
Torques:
Exhaust muffler lock bolt:
Exhaust muffler joint lock nut: 1.0~1.4kgf-m
＊
Be sure to install a new exhaust muffler
packing collar.
Leg Shield
3.0~3.6kgf-m
NEW SUPER8 50
Decorative Ring
Bolts
Lock Nut
2-8