9. DRIVE AND DRIVEN PULLEYS
Measure the clutch lining thickness.
Service Limit: 1.5mm replace if below
CLUTCH/DRIVEN PULLEY
DISASSEMBLY
Hold the clutch/driven pulley assembly with
the clutch spring compressor.
*
Be sure to use a clutch spring compressor
to avoid spring damage.
Special
Clutch Spring Compressor
Set the clutch spring compressor in a vise
and remove the clutch drive plate nut.
Loosen the clutch spring compressor and
disassemble the clutch/driven pulley
assembly.
Remove the seal collar.
Super 8 50
Clutch/Driven Pulley
Clutch Spring Compressor
9-8