Frame Covers; Front Cover Removal; Handlebar Rear Cover Removal; Handlebar Front Cover Removal - KYMCO Super 8 50 Service Manual

2
. FRAME COVERS/EXHAUST MUFFLER
NEW SUPER8 50

FRAME COVERS

FRONT COVER REMOVAL

Bolts
Remove the screw on the front cover.
Front Cover
Screw
Remove the two screws on the back of the
front cover.
Remove the front cover.
Remove the two bolt and ten screws attaching
the R/L mole side.
Remove the R/L mole side
The installation sequence is the reverse of
removal.
HANDLEBAR REAR COVER
Screws
REMOVAL
Screws
Remove the handlebar rear cover screw.
Disconnect the speedometer cable, right and
Handlebar Rear Cover
left handlebar switch couplers, and the stop
switch wire connectors.
Remove two screws inside the handlebar rear
cover and remove the handlebar rear cover.
The installation sequence is the reverse of
removal.
Screws
Screws
HANDLEBAR FRONT COVER
REMOVAL
Handlebar Front Cover
Remove the bolt attaching the handlebar front
cover.
Remove the handlebar front cover.
MET-IN BOX REMOVAL
Bolts
Open the seat and remove the four bolt
attaching the met-in box.
Remove the met-in box .
Bolts
2-4