KYMCO Super 8 50 Service Manual page 112

9. DRIVE AND DRIVEN PULLEYS
Pull out the guide roller pins and guide
rollers. Remove the movable driven face
from the driven face.
Remove the oil seal from the movable
driven face.
INSPECTION
Measure the driven face spring free length.
Service Limit: 97mm replace if below
Check the driven face for wear or damage.
Measure the driven face O.D.
Service Limit: 33.94mm replace if below
9-9
Guide Roller
Movable Driven Face
Super 8 50
Guide Roller Pin
O-ring
Oil Seal