Integrity check
After the server comes up verify the following:
1. Ping the IP address of the server and ensure connectivity.
2. On the Server (Maintenance) Web page select Server > Status Summary.
The system displays the Status Summary Page screen.
3. Ensure the following:
Mode is Active.
●
Server Hardware is okay.
●
Processes is okay.
●
4. On the Server (Maintenance) Web page select Server > Process Status.
The system displays the Process Status screen.
5. In the Content section select Summary.
6. In the Frequency section select Display once.
7. Click View.
The system displays the View Process Status Results screen.
8. Ensure that all processes are UP.
Note:
Secure Access link service is installed when you install Communication Manager
Note:
release 5.2. The process related to the service is listed as Secure-services
under statapp. If the service is not enabled it may be OFF.
If Communication Manager Messaging is installed
Complete this section only if Communication Manager Messaging is installed. Otherwise
continue with
If the server is a LSP
on page 37.
Integrity check
03-300528 Issue 6 May 2009
35