Avaya S8300 Series Replacement Manual page 16

Job Aid: Replacing the S8300 Server or its hard drive
c. Loosen the two thumb screws on the S8300. Disconnect the USB connected
CompactFlash reader/writer if present (S8300C, S8300D). Disconnect the USB
connected modem if present. Disconnect the USB connected DVD/CD reader if present.
Note:
For example, S8300A or S8300B (with G250 or G350 only): When removing or
Note:
inserting the server, also remove or insert the space bar module together with the
server. This procedure varies with different gateways.
d. Remove the S8300 Server (may require to remove a module on the media gateway while
you remove the server. The type of media gateway determines the module to be
removed)
!
Important:
S8300B: If you are replacing the hard drive use Step
Important:
Figure 1: S8300B hard drive replacement
entire S8300 Server (including its hard drive), skip to Step 5.
S8300C or S8300D: If you are replacing the hard drive use Step
t and
the entire S8300 Server (including its hard drive), skip to Step 5.
e. S8300B: Unscrew the four screws on the bottom of the S8300 Server that attach to the
hard-drive standoffs (Refer to
12 Job Aids for Field Replacements (FRUs) for the Avaya S8300 Server with the G700 Media Gateway
Figure 2: S8300C hard drive replacement
on page 13. If you are replacing the
on page 15. If you are replacing
Figure 1: S8300B hard drive replacement
e through Step l and
m through Step
on page 13).