Avaya S8300 Series Replacement Manual page 14

Job Aid: Replacing the S8300 Server or its hard drive
c. If you get the Welcome screen, click Continue, log in by using your login credentials.
d. On the Administration menu, click Server (Maintenance).
e. Select Boot Partition under Server Upgrades.
- If the View Partition Status table, showing the status of the hda1 and hda6 partitions,
the S8300 hardware is functional; skip to Step 2.
- If the View Partition Status table is not displayed, or you get an error message, the
S8300 hardware may not be functional; continue with Step f.
f. If the previous steps indicate that the S8300 hardware may not be functional,
power-cycle the media gateway (unplug and plug-in the power cord) and repeat Steps a -
d above. If you do not get the Welcome screen in Step
table is not displayed in Step e, then the S8300 hardware is not functional — skip to Step
3.
Note:
If the S8300 hardware is not functional, skip Step
Note:
Step 3.
Note:
If the server is being replaced due to some fault, it can likely not be upgraded.
Note:
The data restore process is not restricted to backups created from the same
release. The backup set created from the server being replaced must be
compatible with the software installed on the replacement server at the time of
the restore. Please contact your Project Manager to know if the backup set on the
server being replaced is compatible to a different Communication Manager
software release on the new server.
2. Back up data:
a. On the Server (Maintenance) Web page, select Backup Now under Data Backup /
Restore.
b. On the Backup Now screen, check all of the following data sets:
- If the S8300 is not an LSP, select ACP Translations; select the radio button for Save
ACP translations before backup.
- Server and System Files
- Security Files
- If Communication Manager Messaging is installed on the S8300, also select
Translations, Names, and Messages.
The Backup Method has two possible selections: Network Device or Local PC Card.
c. Select the Backup Method
Network Device
●
- enter the information given by the customer
10 Job Aids for Field Replacements (FRUs) for the Avaya S8300 Server with the G700 Media Gateway
b or if the View Partition Status
2 and Step 2 and continue with