Appendix 1: Set Up A Tftp Server - Avaya S8300 Series Replacement Manual

Job aids for field replacements (frus) with the g700 media gateway
Hide thumbs Also See for S8300 Series:
Table of Contents

Advertisement

Job Aid: Replacing the G700 Media Gateway
23. Provision the new G700.
a. On the primary controller, open a SAT session
b. At the SAT prompt, type
change media-gateway <mg-number>
where <mg-number> is the number assigned to this G700
c. Type the serial number of the new G700 in the Identifier field and submit the screen.
d. Verify that the new G700 registers with Communication Manager:
- Open a SAT session and type
list media-gateway
The Registered? column (last column on the right) should have y for the new G700.
24. Save translations on the primary controller.
25. Test as appropriate — for example, make station calls from/to the replaced G700, check for
and resolve any new alarms.

Appendix 1: Set up a TFTP Server

The following instructions describe how to configure a Windows-based computer as a TFTP
server. A TFTP server is needed for the copy tftp commands, which backup the
configuration files and install firmware on the G700. The TFTP server can be on any computer
that can be networked to the G700.
Follow these steps to configure a computer as a TFTP server.
1. On the hard drive of the computer, create a directory into which you will copy the G700
configuration files or load the G700 firmware image files; for example, C:\tftpboot.
2. Access the Avaya Support Web site (http://support.avaya.com/). Select Downloads.
3. Select 4600 IP Telephones.
4. Scroll down the list of Software Downloads to recent posting, for example 4601/... IP
Telephone Release 111004 and TFTP Server (November 2004).
5. Scroll to bottom of page to find iptel_avaya_tftp.exe.
6. Click on the program and download it to any convenient temporary directory.
You may also wish to download the file iptel.pdf, which provides instructions on installing
iptel_avaya_tftp.exe on Windows systems.
7. Go to the directory containing the iptel_avaya_tftp.exe file, double-click on the filename
and follow the installation wizard instructions to install it.
The default installation directory is c:\Program Files\Walusoft\TFTPSuite — you can accept
this default or specify a different one.
52 Job Aids for Field Replacements (FRUs) for the Avaya S8300 Media Server with the G700 Media

Advertisement

Table of Contents
loading

This manual is also suitable for:

S8300cS8300dS8300aS8300b

Table of Contents